DOWNLOAD : HAWA Systems for Wood Doors
HAWA JUNIOR SYSTEMS
SLIDING AND POCKETING WOOD DOORS
Proven over decades, a million times and more: that is HAWA Junior. The HAWA Junior is a sliding door system for pocket and sliding doors. It is known for its smooth, quiet operation, durability, and simple installation.
The HAWA Junior kit comes with:
2 two-wheeled trolleys
2 two-way suspension fittings
1 track buffer with retaining spring
1 wall buffer
1 rattle-proof floor guide
1 height adjusting pin
You’ll also need:
Upper Track, based on your door weight and track length required
Glue-In Guide Rail (for bottom of door)
Specification:
To properly specify which Junior is right for your application, you’ll need to know and provide a few important pieces of information:
Function: single door, pair of bi-parting doors, or pair of bi-passing doors
Weight of door panel/s
Width of door panel/s
Width of door opening OR length of track needed
Door panel thickness
Optional accessories, such as soft close mechanism or door seals
Which Junior Model?
You’ll notice that HAWA Junior’s are distinguishable by the numbers and letters in their titles. For instance there is the 40, 80, 120, 160, 250. These numbers refer to the weight capacity of the door panels in KILOGRAMS. For instance, the weight capacity of the HAWA Junior 80/B or HAWA Junior 80/Z is 80 kilograms, or 176 lbs. Pretty simple, right?
It is important to note that we often see smart, careful contractors with doors weighing close to 80kg upgrade to the HAWA Junior 120. In doing so, these contractors ensure a durable, smooth sliding operation.
Next, the letter after the number, such as A, B, or Z, refers to the method in which the track is mounted. For instance, when installing a HAWA Junior 80/B, the top edge of the door is mortised for a cleaner look. The HAWA Junior 80/Z, however, is surface mounted to the top edge of the door for simpler installation.
You might wonder, then, what the difference between the A and Z systems are. The answer: they reference the same, top-mounted fittings, but once you go over 264 lbs, the Z turns to A. So, a HAWA Junior 40/Z, 80/Z, 120/A, 160/A, and 250/A all indicate that the system attaches to the top edge of the door, rather than being mortised.
DOWNLOAD : HAWA Junior 80/B Specification Document
DOWNLOAD : HAWA Junior 80/B Installation Instructions
GET A QUOTE
You are able to purchase several HAWA Junior systems on Better Building Hardware, or you can request a quote based on your specific requirements.
ACCESSORIES
Softmove, the Soft and Self-Closing Damper
HAWA has engineered a robust sliding door closer that can be integrated into any of their Junior 40, 80, & 120 sliding door hardware systems. There is a minimum door width requirement for using either a Softmove on one side of the opening or both sides of the opening. The chart below shows you how wide your door must be for each system and application:
DOWNLOAD : Soft Close Information Sheet
Assembly Wedge
Allowing for horizontal adjustment and low installation height, HAWA offers this Assembly Wedge for the Junior 80/B and 120/B. This accessory fastens the suspension trolley from the front side, enabling designs with the sliding doors running almost gapless at the ceiling. It also allows the doors to be mounted and demounted without removing the door trim.
DOWNLOAD : Assembly Wedge Installation Instructions
THE HAWA JUNIOR 80/B (MOD.)
Worth honorable mention, the HAWA Junior 80/B Mod. is the new and improved (aka modified) version of the HAWA 80/B. Here’s why it’s superior:
New Two-way Suspension Unit for simple and adjustable installation
New Track Stop with adjustable retention force and integrated cover flap
Includes 2 Suspension Bolts: a 10mm bolt for mountiing the track to the surface of the frame, and a 20mm bolt for burying the track in the ceiling
Plus all of the advantages of the original 80/B, such as smooth and quiet operation, vertical adjustability, and low headroom requirements!
DOWNLOAD : HAWA Junior 80/B Mod. Specification Manual
MORE HAWA SOLUTIONS
